Quality sanding and coating.

   All visible nails punched and filled using an appropriate colour timber putty. Putty colour will approximate the colour of the darker boards within a floor.

  Nail holes, knot holes and gaps at the end boards to be filled with appropriate filler.

   Some variation in colour and grain between new and old boards.

   Black japanning or stain around the perimeter of some older timber may produce a finished floor with a two-tone effect.

   All timber floors will expand and contract according to the environment.  Floor movement is quite normal and to be expected.

   A coating that will provide many years of beauty providing that it is properly maintained.

   Some lighting, particularly down lights will produce a visible, fine, circular scratched effect on the floor. High gloss finishes will tend to accentuate this effect that often reduces over time.

   Some slight markings on skirting boards from contact with the edger machine.

   Any silicone and other products on a floor may cause rejection with subsequent coats of polyurethane.  Silicone or silicone based products include; Fabulon, Hair Spray, Fly Spray, Cleaning Agents etc.
 

Continued Next Page -  What Not To Expect  

|  Copyright 2005-2010 The Floor Shop. All Rights Reserved  | CONTACT US |  PRIVACY   |   SITE MAP   |   Best Viewed 1024 x 768  |